To harness the full potential of neutral cellulase enzymes in textile finishing, understanding the correct dosage and application parameters is essential. NINGBO INNO PHARMCHEM CO.,LTD. provides high-quality enzymes and guidance to ensure manufacturers achieve the best results in biopolishing and enhancing cellulosic fabrics.

The effectiveness of cellulase enzymes is highly dependent on several factors, including enzyme concentration, treatment time, temperature, and pH. For our neutral cellulase enzyme, optimal performance is typically achieved within a pH range of 5.5 to 7.0, with an ideal temperature range of 40-60°C. These conditions ensure efficient enzymatic activity while minimizing stress on the fabric fibers. When discussing enzyme for cellulose fabrics, these parameters are critical for achieving the desired outcome.

Enzyme dosage is a key variable that directly impacts the degree of biopolishing and the resulting fabric properties. While specific recommendations can vary based on the fabric type, desired effect, and processing equipment, a common starting point for our highly concentrated neutral cellulase enzyme is between 0.5% to 2.0% (owf - on weight of fabric). It is always advisable to conduct trials to determine the precise dosage that yields the best balance of smoothness, color retention, and strength preservation for a particular application. NINGBO INNO PHARMCHEM CO.,LTD. offers technical support to help customers find the optimal dosage.

Treatment time is another crucial factor. Typically, biopolishing processes using neutral cellulase enzymes can range from 30 to 90 minutes. Shorter times might be sufficient for a light smoothing effect, while longer durations can achieve more pronounced fuzz removal and a softer feel. However, excessively long treatment times, especially at higher temperatures, can lead to increased fabric strength loss. Therefore, careful monitoring and optimization of the treatment duration are necessary.

When integrating these enzymes into textile dyeing and finishing mills, it's important to consider the material-to-liquor ratio, which typically ranges from 5:1 to 15:1. This ratio ensures that the enzyme has sufficient contact with the fabric. Following the enzymatic treatment, inactivation of the enzyme is usually achieved by heating the bath to above 70-80°C for a short period. NINGBO INNO PHARMCHEM CO.,LTD. emphasizes that proper inactivation is key to preventing over-processing and ensuring the final quality of the fabric.

By understanding and carefully controlling these application parameters, textile manufacturers can maximize the benefits of neutral cellulase enzymes. NINGBO INNO PHARMCHEM CO.,LTD. is committed to empowering its clients with the knowledge and high-quality products needed for successful textile finishing, including advanced solutions for cotton and other cellulosic fibers. Partner with us to refine your processes and achieve superior textile outcomes.