The transition to more environmentally friendly refrigerants is a key objective for many industries. For those with existing refrigeration systems that currently use R22 or R404A, retrofitting with R407F offers a practical and efficient solution. R407F, a blend of HFCs, is designed to be a direct or near-direct replacement, minimizing the need for extensive system modifications. This guide outlines the essential steps and considerations for a successful R407F retrofit.

Before commencing any retrofit, it's crucial to understand the compatibility of your current system. R407F is generally compatible with POE (Polyolester) lubricants, which are often used in systems designed for R404A. If your system currently uses mineral oil with R22, a flush and oil change to POE will be necessary. NINGBO INNO PHARMCHEM CO.,LTD. can provide guidance on selecting the correct lubricant for your specific application, ensuring the longevity and performance of your retrofitted system.

The retrofitting process typically involves several key stages:

  1. System Preparation: Thoroughly clean and evacuate the system to remove any residual moisture and contaminants. This step is critical for preventing system damage and ensuring optimal performance of the new refrigerant.
  2. Oil Change (if necessary): If your system currently uses mineral oil, it must be replaced with POE lubricant compatible with R407F. Ensure the correct amount of POE oil is added to the system.
  3. Refrigerant Recovery: Safely recover the existing R22 or R404A refrigerant using appropriate recovery equipment.
  4. Leak Testing: Perform a comprehensive leak test on the system after the initial preparation to ensure there are no leaks before charging with R407F.
  5. Charging with R407F: Charge the system with R407F, preferably in its liquid state, to maintain the correct blend composition. Refer to the manufacturer's guidelines for the precise charging amount. NINGBO INNO PHARMCHEM CO.,LTD. can assist in sourcing R407F to meet your requirements.
  6. System Operation and Monitoring: Start the system and monitor its operating parameters, such as pressures, temperatures, and superheat. Adjustments may be necessary to optimize performance.

It is important to note that while R407F offers a good performance match, slight adjustments to system settings might be required to achieve peak efficiency. Consulting with experienced technicians and referring to product-specific R407F data sheets from suppliers like NINGBO INNO PHARMCHEM CO.,LTD. is highly recommended.

When planning your R407F purchase, consider the quantity needed and the supplier's reliability. NINGBO INNO PHARMCHEM CO.,LTD. offers a range of R407F options, ensuring you can acquire the necessary refrigerant for your retrofit project. By following these steps and working with trusted partners, you can successfully transition to R407F and benefit from its improved environmental profile and operational efficiency.