86-574-87319282

86-574-87314919

86-574-27912196

info@nbinno.com

Product details

Bulk supply and Contract manufacturing of Fine Chemicals,Pharmaceutical Intermediates,APIs from kilos to tons

chlorhexidine gluconate

CAS：
18472-51-0
Synonym：
chlorhexidine gluconate

Details

Synonyms：

1,6-Bis(N5-[p-chlorophenyl]-N1-biguanido)hexane

1,1'-Hexamethylenebis[5-(4-chlorophenyl)biguanide] Digluconate

corsodyl

1,1‘-Hexamethylenebis(5-[p-chlorophenyl]biguanide)

unisept

chlorohexidine digluconate

orahexal

Chlorhexidin Bigluconate

hibidil

disteryl

chlorhexidine gigluconate

placout

Chlorhexidine digluconate

septeal

1,1'-Hexamethylenebis(5-[p-chlorophenyl]biguanide)

abacil

Chlorhexamed

Molecular Formula: C34H54Cl2N10O14

Molecular weight： 897.75700

Appearance and properties: colorless to light yellow transparent liquid

Density: 1.06 g/mL at 25 °C(lit.)

Boiling point: 699.3ºC at 760 mmHg

Melting point: 134ºC

Flash point: 376.7ºC

PRODUCT DESCRIPTION;PHMG is one of excellent antibacterial properties polymer which the main chain containsguanidine.This chemical is water soluble and the aqueous solution is colorless and odorless,broad-spectrum, high-efficiency, low toxicity, good stability, non-flammable and non-ex-plosive.Basically non-corrosive to stainless steel, stainless copper, carbon steel, wood, plas-tic, etc. The product itself is a high molecular polymer, which is not easily absorbed by tis-sues, has no corrosive effect, has good stability and is easy to rinse, good biocompatibility.lt is widely used in textile printing and dyeing, animal husbandry, aquaculture, medical ster-ilization and daily disinfection.

DOSAGE:Based on the equipment and test result for the dosage when formula with other disin-fectant.As a single agent, it is recommended to 2% aqueous solution.

SECURITY:You must wear a gas mask and work clothes. If you may be exposed to dust, you must weara dust mask (full face mask). In an emergency, you must wear an air ventilator.

FIRST-AID:Inhalation: quickly leave the scene to a place with fresh air, keep the air unobstructed, ifbreathing is difficult, give oxygen. If breathing stops, give artificial respiration immedi-ately and seek medical attention.

Skin contact: Take off contaminated clothes and rinse with plenty of water.

Eye contact: immediately lift the eyelid and rinse with plenty of water for 15 minutes, andseek medical attention immediately.

PACKING & STORAGE:Store in a cool, dry,well-ventilated warehouse.The temperature must lower than 37 ℃.Should be stored separately from oxidants and food chemicals, remember to mix storage.keep the container tightly closed. Keep away from fire and heat sources. The warehousemust install lightning protection facilities.The exhaust system should be equipped with agrounding device to remove static electricity. Application explosion-proof lighting and ventilationsettings. It is forbidden to use equipment and tools that easily generate sparks. The storagearea should be equipped with suitable materials to contain the leakage.

PACKING& STORAGE:Operators should be specially trained and strictly abide by the operating procedures. The opera-tion should be carried out in a place with local ventilation or comprehensive ventilation facilities.Avoid contact with eyes and skin, and avoid breathing steam. Keep away from fire and heatsources. Smoking is strictly prohibited in the workplace, and explosion-proof ventilation systemsand equipment are used. The exhaust system should be equipped with a grounding device toremove static electricity. If canning is required, pay attention to the flow rate and have a ground-ing device to prevent static electricity from accumulating.It is forbidden to contact with oxidantsand other prohibited materials, avoid electrostatic discharge, moisture, humidity and etc. Whenhandling, load and unload with care to prevent damage to packaging and containers. The emp-tied packaging may leave hazardous substances. Wash hands after use and prohibit eating inthe workplace. Equipped with corresponding types and quantities of fire-fighting equipmentand leakage emergency treatment equipment.

Project	Index
Appearance(+25°C)	Colorless or light-yellow viscous liquid
Active ingredient	19%-21%
Water soluble	Miscible with water ,Dissolve in ethanol or propanol
Odor	Odorless or almost odorless
Main ingredients	CHG
PH(25°C)	5.5-7.0
Residue on ignition	≤0.1%
Density	1.060-1.070
Discriminate	，，3Positive reaction

Our manufacturing range includes products for diverse industrial applications, and features a range of alkylamines, pharmaceutical intermediates, flavour & fragrance and other personal care products, and other specialties.Provide high quality, regulatory compliance products and services to partners and customers.We understand that it's crucial to provide support to our customers for regulatory compliance and risk mitigation, as well as documented proof that our pharmaceutical chemicals meet the highest compendial standards.We are specialists in chiral chemistry using both chemocatalysis and biocatalysis technologies, but also have practical operating experience over a wide range of modern synthetic reactions.With complete organizational structure and main positioning and high-end product structure design, R&D is the driving force for enterprise development, and quality is the basis for enterprise survival.

Are you looking for China or India manufacturers of chlorhexidine gluconate CAS:18472-51-0, chlorhexidine gluconate factory or chlorhexidine gluconate supplier? Where can buy chlorhexidine gluconate or if you want to know the price market of chlorhexidine gluconate? Welcome to contact us for chlorhexidine gluconate COA or MSDS.

Laboratory in Ningbo
Our company's R&D company, Ningbo Gino Chemical Co., Ltd. was established in December 2011. we have several fume hoods and kilogram laboratory, and have purchased 20L, 50L reactors and as a preliminary pilot manufacturing of the products. At the same time, We mobilized external resources to establish a pilot facility in Henan Zhumadian and Anhui Anqing, and cooperating with Shandong Zibo and Jiangsu Changzhou factories as a large production facility for our products.

Factory in Shanxi Province
At the end of 2017, We invested workshop in Xinjiang County Longzhou Chemical Co., Ltd., Xinjiang County Coal Mine Park, Yuncheng, Shanxi. The first phase of the reactors were 30* 2000L~5000L, The contract output value is 50 million annually, factory has passed the audit from public listed company domestic and abroad.

Factory in Shandong Province
The production base of liquid rectification chemical products located in Liaocheng, Shandong Province is the main outsourcing production base of our company. The products are sold to leading enterprises and listed companies in the carcass industry for many years. The production, quality and service are stable, delivery is timely, and some individual products are covering 90% of the market.

Factory in Henan Province
In year 2020, We invested workshop in Henan province, the workshop consists of 50*2000L~5000L reactors, The types of reactions that can be manufacturer there are: bromination, cyanidation, and conventional reactions.

Disclaimer: Certain products are for research use only. Not for diagnostic or therapeutic use. Not for human use. INNOPHARMCHEM does not sell to individuals. INNOPHARMCHEM does not warrant that the use or sale of the products delivered under will not infringe the claims of any China or other patents covering the product itself or the use thereof in combination with other products or the operation of any process.

chlorhexidine | N,N'''-1,6-Hexanediylbis(N'-cyanoguanidine)