Services:
CUSTOM SYNTHESIS
CONTRACT MFG
Contact:

86-574-87319282

86-574-87314919

86-574-27912196

info@nbinno.com

Product details
Bulk supply and Contract manufacturing of Fine Chemicals,Pharmaceutical Intermediates,APIs from kilos to tons
Zinc acrylate_14643-87-9

Zinc acrylate

  • CAS:

    14643-87-9

  • Synonym:

    2-Propenoic acid,zinc salt;Acrylic acid,zinc salt;zinc(II) acrylate;EINECS 238-692-3;Zinc prop-2-enoate;Zinc acrylic acid;Zinc acrylate;Cray Valley Dymalink® 633;Sartomer Saret® SR633;Golf ZAD

Details

Synonyms:
2-Propenoic acid,zinc salt
Acrylic acid,zinc salt
zinc(II) acrylate
EINECS 238-692-3
Zinc prop-2-enoate
Zinc acrylic acid
Zinc acrylate
Cray Valley Dymalink® 633
Sartomer Saret® SR633
Golf ZAD
 
Molecular Formula: C6H6O4Zn
Molecular weight:207.48900
 
Appearance and properties: white solid
Density: 1.6 g/cm3
Boiling point: 141ºC at 760 mmHg
Melting point: 250-244ºC
Flash point: 61.6ºC
Vapor pressure: 3.42mmHg at 25°C
 
Product Description:
ZDA is a metal salt of unsaturated carboxylic acid (Unsaturated Carboxylic Salt), used as a crosslinking agent for peroxide vulcanized rubber. Its specific chemical composition is anhydrous zinc acrylate. ZDA can form an "ionic" cross-linked structure in peroxide-vulcanized rubber. This "ionic" bond has good heat resistance and can slide along the direction of the carbon-hydrocarbon chain and can be restored. This makes this vulcanizing agent have the advantages of peroxide and sulfur vulcanizing agents. It can impart high tensile strength and high tear strength to rubber products, while also significantly improving the thermal aging properties of the products. Specifically, ZDA can significantly improve and improve the adhesion of peroxide vulcaniz It is a more economical way to improve the performance of peroxide vulcanized rubber. Under the condition of achieving the same or even better performance, the use cost is lower than the use cost of some commonly used vulcanizing agents such as HVA-2 (PDM).
 
We have two specifications of zinc acrylate, one for the rubber industry and the other for the manufacture of golf balls.
 
Used in golf
Zinc acrylate has been used as a polybutadiene rubber for vulcanizing the core part of golf balls for many years. Polybutadiene crosslinked with zinc acrylate is a very hard rubber with high compression resistance and excellent resilience. Zinc salt has been proven to be the most effective salt, and it is now widely used to make golf balls. Zinc acrylate can be quickly compounded with various rubbers, not only has strong oil and solvent resistance, but also shows very good thermal stability. Many unique characteristics are formed due to the interaction between the zinc cation and the carboxylic anion. Metal cations, especially zinc cations, are generally believed to be cross-linked through ionic bonds to improve the tensile properties of metal-neutral ionic bond polymers. At the same time, this product can be used as a vulcanizing agent for rubber, a crosslinking agent for artificial marble, and a heat-resistant additive. It has the properties of acid and alkali resistance, oil resistance, corrosion resistance and high temperature resistance. Combining with rubber can obtain salt-resistant cross-linking bonds, improve rubber strength, and improve low-temperature performance. In addition, it can also improve the elasticity, increase the tear resistance, reduce the white carbon black, and strengthen the compression permanent deflection of the rubber.
 
Adding 3-6 parts of zinc acrylate to the formula of the EPDM rubber insulation layer significantly improves the bonding performance of the metal and EPDM rubber insulation layer. Zinc acrylate has little effect on the processing fluidity of the rubber compound. And with the increase of the dosage, the crosslinking effect of the system increases. In the presence of the peroxide vulcanization system, the zinc acrylate has a significant reinforcing effect on the rubber compound. With the increase of the dosage, the tensile strength of the EPDM vulcanizate, The tear strength and hardness are improved, and the elongation at break is reduced.
 
Used in rubber
Applicable rubber: hydrogenated nitrile rubber (HNBR), butadiene rubber (BR), ethylene propylene diene rubber (EPDM), natural rubber (NR), styrene butadiene rubber (SBR), chlorinated polyethylene (CPE), Peroxide cross-linked rubber (elastomer) such as silicone rubber and fluorine rubber.
 
Typical use:
1. Peroxide vulcanized rubber products with good heat resistance, oil resistance, ozone resistance, load-bearing capacity, dynamic stability, abrasion resistance and cord bonding strength are required, such as rubber rollers, timing belts, and V-belts , Seals, belts, hoses, engine brackets and other rubber parts under the hood.
2. Used in EPDM, natural rubber, butyl rubber, styrene butadiene rubber and other automotive sealants, it can significantly improve the adhesion of the sealant to steel, glass, coatings and even oily steel and the heat resistance of the sealant And modulus.
3. It is used in the rubber sheath of EPDM and other cables to improve heat resistance and tensile and tear strength.
 
Packaging, storage and transportation:
Packed in paper bags, with a net weight of 15 kg.
It should be stored below 30℃, away from heat, fire, water, moisture, and 0.5m above the ground.

Items of Analysis Standard of Analysis Test Results
Appearance White powder Conform
100μm Passing Rate ≥99% 99.9%
Ash 39±2 % 38.5%
Assay ≥95.0% 96.5%
Conclusion Conforms to Factory Standard
 
 

Are you looking for China or India manufacturers of Golf ZAD CAS:14643-87-9, zinc(II) acrylate factory or Acrylic acid,zinc salt supplier? Where can buy Golf ZAD or if you want to know the price market of zinc(II) acrylate? Welcome to contact us for Acrylic acid,zinc salt COA or MSDS.

Laboratory in Ningbo
Our company's R&D company, Ningbo Gino Chemical Co., Ltd. was established in December 2011. we have several fume hoods and kilogram laboratory, and have purchased 20L, 50L reactors and as a preliminary pilot manufacturing of the products. At the same time, We mobilized external resources to establish a pilot facility in Henan Zhumadian and Anhui Anqing, and cooperating with Shandong Zibo and Jiangsu Changzhou factories as a large production facility for our products.

Factory in Shanxi Province
At the end of 2017, We invested workshop in Xinjiang County Longzhou Chemical Co., Ltd., Xinjiang County Coal Mine Park, Yuncheng, Shanxi. The first phase of the reactors were 30* 2000L~5000L, The contract output value is 50 million annually, factory has passed the audit from public listed company domestic and abroad.

Factory in Shandong Province
The production base of liquid rectification chemical products located in Liaocheng, Shandong Province is the main outsourcing production base of our company. The products are sold to leading enterprises and listed companies in the carcass industry for many years. The production, quality and service are stable, delivery is timely, and some individual products are covering 90% of the market.

Factory in Henan Province
In year 2020, We invested workshop in Henan province, the workshop consists of 50*2000L~5000L reactors, The types of reactions that can be manufacturer there are: bromination, cyanidation, and conventional reactions.

Disclaimer: Certain products are for research use only. Not for diagnostic or therapeutic use. Not for human use. INNOPHARMCHEM does not sell to individuals. INNOPHARMCHEM does not warrant that the use or sale of the products delivered under will not infringe the claims of any China or other patents covering the product itself or the use thereof in combination with other products or the operation of any process.

1,2,4,5-Tetrabromobenzene | Diclosan