For R&D scientists and product formulators, a deep understanding of chemical specifications is the bedrock of successful product development. Isopropylphenyl Phosphate (IPPP), a versatile halogen-free flame retardant and plasticizer, requires precise technical knowledge for its optimal application. With its CAS number 68937-41-7, IPPP offers a unique combination of properties that can significantly impact the performance of polymers, rubbers, and coatings. This article delves into the critical technical specifications of IPPP, guiding formulators on how to leverage them effectively when looking to buy this chemical.

Key Technical Specifications of IPPP Explained

When reviewing datasheets from a prospective manufacturer or supplier, pay close attention to the following parameters:

  • Appearance: Typically described as a colorless or light yellow transparent liquid. This visual cue is the first indicator of product quality and consistency. Variations might suggest impurities or degradation.
  • Viscosity (at 25°C): This measures the fluid's resistance to flow. IPPP typically has a viscosity ranging from 42-50 cP (IPPP35) to higher values like 95-114 cP (IPPP95) or even 64-76 cP for specific grades. Lower viscosity grades (e.g., IPPP35) are generally easier to handle and incorporate into formulations, especially in low-temperature processing or when used in sprays and coatings. Higher viscosity grades might offer better permanence or reduced migration in certain applications. Understanding your processing method will dictate the ideal viscosity.
  • Flash Point: The minimum temperature at which the liquid gives off sufficient vapor to ignite in the presence of an ignition source. A high flash point, typically above 220°C or even 230°C for IPPP, signifies lower flammability risk during handling and processing, enhancing workplace safety.
  • Acid Value (mg KOH/g): This indicates the amount of free acidic components present. A low acid value, usually ≤ 0.1 mg KOH/g, is desirable as it suggests higher purity and stability. High acidity can potentially corrode equipment or negatively affect the stability of the polymer matrix.
  • Moisture Content (%): Water can negatively impact the performance of many chemicals, including IPPP, potentially leading to hydrolysis or affecting processing. A low moisture content, typically ≤ 0.1%, is standard and ensures product integrity.
  • Phosphorus Content (P%): This is a crucial indicator of the flame-retardant efficacy. Higher phosphorus content generally correlates with better flame-retardant performance. IPPP typically boasts a P content of around 7.6% to 8.6%.
  • Density: Usually around 1.16-1.18 g/cm³ at 20°C or 25°C. Density is important for volume-to-weight calculations in formulation and logistics.
  • Refractive Index: A measure of how light bends when passing through the substance. It's a useful parameter for quality control and identification.
  • Color Value (APHA): Measures the yellowness or color intensity. A low APHA value (e.g., ≤ 50) indicates a clear, colorless product, which is desirable for applications where color is critical.

Choosing the Right Grade and Supplier

Different grades of IPPP might exist with slight variations in these specifications, tailored for specific applications. For instance, a grade with lower viscosity might be preferred for coatings, while a grade with a specific P content might be targeted for high-performance flame retardancy in engineering plastics. When you purchase IPPP, ensure the specifications provided by the supplier align perfectly with your R&D or production requirements.

Always request a detailed Technical Data Sheet (TDS) and Certificate of Analysis (COA) from your chosen manufacturer. These documents are vital for quality assurance and regulatory compliance. Furthermore, discussing your specific application needs with the supplier's technical team can help you select the most appropriate IPPP grade and ensure optimal formulation results. By understanding these technical details, formulators can confidently leverage IPPP to achieve superior product performance and safety.