For chemists, process engineers, and safety officers involved in industrial synthesis, a thorough understanding of chemical intermediates is crucial. Cyclopentylpropionyl Chloride (CAS 104-97-2) is a key intermediate, and safe, effective handling is paramount. This article provides essential information on its properties, safety protocols, and recommended handling practices, aimed at industrial users and procurement specialists looking to buy this compound from reliable manufacturers and suppliers.

Understanding the Chemical Profile of Cyclopentylpropionyl Chloride

Cyclopentylpropionyl Chloride (CAS 104-97-2) is a reactive organic compound with the molecular formula C8H13ClO and a molecular weight of 160.64 g/mol. Key physical and chemical properties include:

  • Appearance: It is typically a liquid.
  • Boiling Point: Approximately 199-200 °C.
  • Density: Around 1.049 g/mL at 25 °C.
  • Flash Point: 184 °F, classifying it as a combustible liquid.
  • Reactivity: It is a reactive acyl chloride, readily undergoing reactions with nucleophiles.
  • Sensitivity: It is sensitive to moisture and should be protected from atmospheric water.

Safety and Hazard Information

Given its reactive nature, Cyclopentylpropionyl Chloride presents specific hazards that require diligent safety measures:

  • Corrosivity: It can cause severe skin burns and eye damage (H314). Direct contact must be avoided.
  • Eye Damage: It can cause serious eye damage (H318).
  • Combustible Liquid: It is classified as a combustible liquid (H227). Keep away from heat, sparks, and open flames.
  • Respiratory Irritation: Inhalation of vapors or mists may cause respiratory irritation. Work in well-ventilated areas or use appropriate respiratory protection.

Recommended Handling and Storage Procedures

Proper handling and storage are critical to ensure safety and maintain the integrity of Cyclopentylpropionyl Chloride:

  • Personal Protective Equipment (PPE): Always wear appropriate PPE, including chemical-resistant gloves (e.g., nitrile or neoprene), safety goggles or a face shield, and protective clothing (lab coat, apron) to prevent skin and eye contact.
  • Ventilation: Handle the material in a well-ventilated area, preferably under a fume hood, to minimize exposure to vapors.
  • Moisture Protection: As it is moisture-sensitive, keep containers tightly sealed when not in use. Transfer operations should be conducted in a dry atmosphere if possible.
  • Incompatible Materials: Avoid contact with water, alcohols, amines, strong bases, and oxidizing agents, as these can lead to vigorous or hazardous reactions.
  • Storage: Store in a cool, dry, well-ventilated area, away from direct sunlight and incompatible materials. Containers should be clearly labeled and kept tightly closed.
  • Spill Response: In case of spills, contain the material and absorb it with an inert absorbent (e.g., vermiculite, sand). Neutralize residues carefully if necessary, and dispose of according to local regulations.

Sourcing Quality Cyclopentylpropionyl Chloride

When you need to buy Cyclopentylpropionyl Chloride, partnering with a reputable manufacturer and supplier is essential. We, as a leading supplier from China, ensure that our product meets high purity standards (≥98%) and comes with comprehensive safety data. Our commitment to quality and safe handling practices supports your industrial operations.

Conclusion

Understanding the properties and safety aspects of Cyclopentylpropionyl Chloride (CAS 104-97-2) is fundamental for its safe and effective use in industrial synthesis. By adhering to recommended handling, storage, and PPE guidelines, and by sourcing from trusted suppliers, you can confidently incorporate this valuable intermediate into your processes. We are dedicated to providing high-quality chemicals and the necessary support for your manufacturing success.