When specifying desiccants for industrial applications, understanding the nuances between different types of silica gel is crucial for optimal performance. NINGBO INNO PHARMCHEM CO.,LTD. provides a comparative overview of Type A and Type B silica gel, two widely used variants, to aid in selection.

Type A silica gel is the most common and generally features fine pores. It is highly effective at low humidity levels and possesses a high surface area, typically between 650-800 m²/g. Its applications are broad, including general drying, catalyst carriers, and adsorbents. However, its adsorption capacity can diminish significantly at higher humidity levels compared to other types.

In contrast, Type B silica gel is characterized by its larger pores and is often referred to as a 'coarse pore' or 'wide pore' silica gel. While its surface area might be slightly lower than Type A (typically 450-600 m²/g), Type B silica gel exhibits a significantly higher adsorption capacity, especially at high humidity levels (e.g., RH 80-90%). This makes it particularly suitable for applications where robust moisture control is needed even in damp environments. It also boasts higher mechanical strength and wear resistance, contributing to its durability in demanding industrial settings.

NINGBO INNO PHARMCHEM CO.,LTD. offers both Type A and Type B silica gels, catering to a spectrum of industrial requirements. For applications demanding superior moisture absorption, especially in high-humidity conditions, Type B silica gel is the recommended choice. We encourage clients to explore our high absorption silica gel bags and to consult our detailed silica gel type B technical specifications when making their selection. As a leading silica gel desiccant supplier, we are committed to providing the right solution for every need.

Choosing between Type A and Type B often depends on the specific operating humidity and the required level of moisture protection. By understanding these differences, businesses can confidently select the most efficient and cost-effective desiccant for their processes. NINGBO INNO PHARMCHEM CO.,LTD. is dedicated to guiding clients through this selection process.