Choosing the most effective coagulant for water treatment is a decision that significantly impacts operational efficiency, cost, and the quality of treated water. Historically, aluminum sulfate (alum) has been a staple, but Polyaluminium Chloride (PAC) has emerged as a superior alternative in many applications. As NINGBO INNO PHARMCHEM CO.,LTD., we often assist clients in understanding these differences to make informed procurement decisions. This guide explores the comparative advantages of PAC over aluminum sulfate for water treatment professionals.

Aluminum sulfate, a traditional inorganic coagulant, has been used for decades in water purification. It functions by reacting with alkalinity in water to form aluminum hydroxide precipitates, which then enmesh impurities. However, aluminum sulfate has several limitations. It requires a relatively high dosage, is highly sensitive to water temperature and pH, and can cause significant pH depression, often necessitating the addition of alkaline chemicals to buffer the water. These factors increase overall treatment costs and complexity.

In contrast, Polyaluminium Chloride (CAS No. 1327-41-9) offers a more advanced and efficient solution. PAC is a pre-polymerized inorganic coagulant with a higher aluminum content and a greater positive charge density. This means it can destabilize and aggregate impurities more effectively at much lower dosages compared to aluminum sulfate. When you search to buy Polyaluminium Chloride, you are often looking for these performance enhancements.

The key advantages of PAC over aluminum sulfate include:

  • Higher Efficiency and Lower Dosage: PAC's pre-polymerized structure and higher charge density allow it to achieve superior flocculation and turbidity removal with significantly less chemical input. This directly reduces chemical costs.
  • Broader Operating Range: PAC performs effectively across a wider range of pH values and water temperatures, making it more versatile and reliable, especially in environments with fluctuating water conditions.
  • Reduced pH Impact: PAC causes less pH depression than aluminum sulfate, often minimizing or eliminating the need for additional alkaline chemicals and simplifying the treatment process.
  • Denser Sludge Formation: The flocs formed by PAC are typically denser, leading to better sedimentation and less sludge volume. This translates to lower sludge dewatering and disposal costs.

For procurement managers and plant operators, the choice between PAC and aluminum sulfate often comes down to a total cost of operation analysis. While the per-unit price might sometimes appear higher for PAC, the reduced dosage, less need for auxiliary chemicals, and lower sludge management costs usually make PAC the more economical and environmentally friendly option in the long run. As a leading Polyaluminium Chloride supplier in China, we are committed to providing high-quality products that deliver these tangible benefits. We encourage you to consult with us to determine if PAC is the right choice for your specific water treatment needs.