For any chemist or process engineer working with Dimethylaminoacetaldehyde Dimethyl Acetal (CAS 38711-20-5), a thorough understanding of its chemical properties and safety profile is crucial. This knowledge ensures efficient use, safe handling, and optimal storage, ultimately leading to successful outcomes in synthesis and manufacturing. NINGBO INNO PHARMCHEM CO.,LTD., a reputable manufacturer, provides this vital information to its clients.

Chemical Profile of Dimethylaminoacetaldehyde Dimethyl Acetal

Dimethylaminoacetaldehyde Dimethyl Acetal, identified by the CAS number 38711-20-5, is a liquid chemical compound with the molecular formula C6H15NO2. Its key physical characteristics include a clear, colorless to slightly yellow appearance. Important chemical properties relevant to its handling and application include:

• Boiling Point: Approximately 64 °C (at 12.0 mmHg), indicating it is a relatively low-boiling point liquid.
• Flash Point: 32°C, classifying it as a flammable liquid, requiring precautions against ignition sources.
• Density: Around 0.89-0.90 g/cm³, which is less dense than water.
• Refractive Index: Typically between 1.4060-1.4100, a common parameter for characterizing liquid purity.
• Moisture Sensitivity: It is sensitive to moisture, necessitating storage in tightly sealed containers to prevent degradation or unwanted reactions.
• Incompatibilities: It reacts with strong oxidizing agents and strong acids, so it must be stored separately.

Safety Information and Handling Precautions

Working with Dimethylaminoacetaldehyde Dimethyl Acetal requires adherence to safety protocols due to its hazardous nature. The primary hazard classifications indicate it as an irritant:

• Skin Irritation: Direct contact can cause redness and irritation.
• Serious Eye Irritation: Exposure to the eyes can lead to significant irritation and discomfort.
• Respiratory Irritation: Inhalation of vapors may irritate the respiratory tract.

Recommended Safety Statements and Handling Procedures:

• Always wear appropriate personal protective equipment (PPE), including gloves, eye protection (safety glasses or goggles), and protective clothing.
• Ensure adequate ventilation in the work area to minimize vapor inhalation.
• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• Use explosion-proof electrical/ventilating/lighting equipment.
• If contact occurs, immediately wash affected skin with plenty of water and seek medical attention if irritation persists. For eye contact, rinse cautiously with water for several minutes, remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
• In case of fire, use dry chemical, CO2, or foam to extinguish.

Sourcing High-Quality Dimethylaminoacetaldehyde Dimethyl Acetal

For reliable sourcing of Dimethylaminoacetaldehyde Dimethyl Acetal, consider NINGBO INNO PHARMCHEM CO.,LTD. as your trusted manufacturer. We provide detailed safety data sheets (SDS) and certificates of analysis (CoA) with our products. Understanding these properties ensures safe and effective use, whether you are buying for research purposes or industrial-scale manufacturing.